Skip to content

introduction.mdx

Latest commit

 

History

History
145 lines (116 loc) · 4.03 KB

introduction.mdx

File metadata and controls

145 lines (116 loc) · 4.03 KB
Raw
title Build Your Own Omi Device
icon book
description As an open-source community, we empower enthusiasts to create their own Omi devices. This guide focuses on building the DevKit 1, as later versions use custom PCBs not suited for DIY assembly.

Overview

Building your own Omi device is a rewarding experience that gives you complete control over your hardware. This guide covers everything you need to know to build the DevKit 1.

All designs are freely available Customize your build as needed Gain hands-on electronics skills Get help from fellow builders

Is This Guide for You?

Building your own Omi device requires **advanced knowledge** of soldering and basic electronics. If you're new to electronics, consider purchasing a pre-built device instead.
Skill Level Recommendation
Beginner Purchase from Omi Shop
Intermediate Follow this guide with extra caution
Advanced This guide is perfect for you

Is It Cheaper?

While building your own device is a great learning experience, it may not always be cheaper than purchasing from our [Shop](https://omi.me).

Consider these factors before deciding:

Component prices vary by region Multiple vendors mean multiple shipping fees You may need to purchase tools Assembly takes several hours Compare the total cost of parts, tools, and shipping against the shop price before deciding to build your own.

Requirements

Skills Needed

Through-hole and surface-mount experience Basic PCB and circuit understanding Familiarity with programming boards

Tools & Materials

Tool Purpose
Soldering iron Connecting components
Solder Joining connections
Fine-tip tweezers Handling small parts
Wire stripper Preparing wires
3D printed case Device enclosure

Important Notes

**Safety First:** Always follow safety precautions when working with electronics and soldering equipment. Work in a well-ventilated area and wear appropriate protective equipment. **Custom PCBs:** The DevKit 2 and Omi CV1 use custom PCBs, making them unsuitable for DIY assembly without specialized manufacturing equipment. This guide focuses on DevKit 1 only.

Ready to Build?

Review and purchase all components from the parts list 3D print or order the enclosure Follow the step-by-step build guide Install the latest firmware

Next Steps

See all required components and where to buy them Step-by-step assembly instructions Install firmware on your device Purchase a ready-made device instead